HOME

AUTONET TV

Archive for October 2013

Fuel Injection Keeps Getting Better for Anchorage Motorists

Posted October 29, 2013 12:00 PM

Anchorage residents know that engines burn fuel to operate. Fuel is pumped from your fuel tank to your engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.

There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with airand before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the engine.

Direct injection engines burn fuel more efficiently than conventional engines. Some models can deliver the power of a V8 with the economy of a V6.

For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same . The turbocharged version delivers 350 horsepower.

Why the big difference in power? Direct injection systems allow fuel to be squirted into the engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions and improved fuel economy.

Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization.

Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.

When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy for Anchorage drivers as well as delivering less power to the engine.

Fuel injectors are not cheap to replace. Direct injection fuel injectors are even more expensive. And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.

So keeping your fuel injectors clean is just good auto advice for Anchorage residents. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance at L and M Motors Inc in Anchorage. Cleaning additives in your fuel can also help.

If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, your fuel injectors will last for a long time.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Clean Fuel Equals Clean Performance for Anchorage Drivers

Posted October 25, 2013 12:00 PM

Hello, Anchorage residents. Let's talk fuel filters. Fuel filters clean the dirt, dust and debris out of your fuel. Both gasoline and diesel-powered engines have them. The fuel filter is located in the fuel line between the fuel tank and the engine.

Anchorage auto owners don't need to filter their fuel because it has lots of grit in it; they need to filter it because it has some grit it in. Any dirt is bad for your engine. The cleaner the fuel, the better your vehicle engine will run.

Over time, the small amounts of rust, dirt and contaminants in your fuel settle out inside the fuel tank. After about five years, this can amount to a quite a bit of sediment. This means that as your vehicle ages, your fuel filter has to work harder to screen your fuel: more sediment in your tank means more potential for grit in your fuel.

The harder your fuel filter works, the more often it needs to be replaced. Check with your owner's manual to find out how often it should be serviced and how long you can expect it to last. Anchorage drivers should change it before it becomes clogged. Your friendly and knowledgeable L and M Motors Inc service advisor can help you with recommended fuel filter replacement schedules.

Good vehicle care means following recommended schedules for preventive maintenance, including changing your fuel filters. Take the auto advice offered in every owner's manual and have your vehicle regularly inspected at L and M Motors Inc. It may save Anchorage auto owners money by preventing costly repairs, but it will also repay them in improved safety and peace of mind.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Fuel Injection: It Keeps Getting Better for Anchorage Drivers

Posted October 15, 2013 12:00 PM

Anchorage residents know that engines need to burn fuel to operate. Fuel is pumped from your fuel tank to your vehicle engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.

There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with airbefore it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the vehicle engine.

Direct injection engines burn fuel more efficiently than conventional vehicle engines. Some models can deliver the power of a V8 with the economy of a V6.

For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same gas mileage. The turbocharged version delivers 350 horsepower.

Why the big difference in power? Direct injection systems allow fuel to be squirted into the vehicle engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions.

Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the vehicle engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization. Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.

When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy as well as delivering less power to the engine.

Anchorage residents should understand that fuel injectors are not cheap to replace. Direct injection fuel injectors are even more . And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.

So keeping your fuel injectors clean is just good auto advice. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance. Cleaning additives in your fuel can also help.

If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, Anchorage drivers will enjoy better fuel economy and their fuel injectors will last for a long time.

Contact us for more tips to help you improve your performance and safety.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Clean Fuel – Clean Performance for Anchorage Drivers

Posted October 10, 2013 12:00 PM

Fuel filters clean the dirt, dust and debris out of your fuel. Both gasoline and diesel-powered engines have them. The fuel filter is located in the fuel line between the fuel tank and the vehicle engine.

Anchorage auto owners don't need to filter their fuel because it has lots of grit in it; they need to filter it because it has some grit it in. Any dirt is bad for your engine. The cleaner the fuel, the better your vehicle engine will run.

Over time, the small amounts of rust, dirt and contaminants in your fuel settle out inside the fuel tank. After about five years, this can amount to a quite a bit of sediment. This means that as your vehicle ages, your fuel filter has to work harder to screen your fuel: more sediment in your tank means more potential for grit in your fuel.

The harder your fuel filter works, the more often it needs to be replaced. Check with your owner's manual to find out how often it should be serviced and how long you can expect it to last. Anchorage drivers should change it before it becomes clogged. Your friendly and knowledgeable L and M Motors Inc service advisor can help you with recommended fuel filter replacement schedules.

Good vehicle care means following recommended schedules for preventive maintenance, including changing your fuel filters. Take the auto advice offered in every owner's manual and have your vehicle regularly inspected at L and M Motors Inc. It may save Anchorage auto owners money by preventing costly repairs, but it will also repay them in improved safety and peace of mind.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Fuel System Cleaning at L and M Motors Inc for Better Performance

Posted October 3, 2013 12:00 PM

Hi Anchorage residents. Let's talk fuel injectors. A fuel injector is a valve that delivers fuel to a vehicle's engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.

Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.

Vehicles have one fuel injector for each cylinder in the engine. Your vehicle's control computer constantly monitors the engine and various sensors in the vehicle.  It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle's engine. Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel efficiency and loss of engine performance for Anchorage residents.

So it's to Anchorage residents' advantage to keep their fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name fuel companies also deliver a more consistent quality of fuel to Anchorage vehicles than do bargain Anchorage area service stations.

The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.

Anchorage residents should check their owner's manual to find out how often they should change their fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.

You can also purchase cleaners at L and M Motors Inc that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won't be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use. If your fuel injectors are gummed up, you can get a professional deep cleaning service at L and M Motors Inc in Anchorage that will result in better fuel economy and improved vehicle performance.

Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Search



Archive

December 2009 (4)
January 2010 (3)
February 2010 (4)
March 2010 (5)
April 2010 (4)
May 2010 (3)
June 2010 (3)
July 2010 (3)
August 2010 (5)
September 2010 (3)
October 2010 (3)
November 2010 (4)
December 2010 (4)
January 2011 (4)
February 2011 (4)
March 2011 (52)
April 2011 (4)
May 2011 (5)
June 2011 (2)
August 2011 (3)
September 2011 (2)
October 2011 (2)
December 2011 (4)
February 2012 (1)
March 2012 (5)
April 2012 (4)
May 2012 (1)
June 2012 (3)
July 2012 (1)
August 2012 (1)
November 2012 (1)
December 2012 (2)
March 2013 (1)
April 2013 (3)
May 2013 (2)
October 2013 (5)
November 2013 (2)
January 2014 (2)
February 2014 (4)
March 2014 (2)
July 2014 (3)
August 2014 (8)
September 2014 (4)
October 2014 (5)
November 2014 (4)
December 2014 (4)
January 2015 (5)
February 2015 (4)
March 2015 (5)
April 2015 (4)
May 2015 (2)
June 2015 (6)
September 2015 (2)
October 2015 (4)
November 2015 (4)
December 2015 (3)
February 2016 (2)
March 2016 (4)
April 2016 (4)
May 2016 (5)
June 2016 (4)
July 2016 (4)
August 2016 (5)
September 2016 (4)
October 2016 (4)
November 2016 (5)
December 2016 (4)
January 2017 (5)
February 2017 (4)
March 2017 (4)
April 2017 (4)

Categories

Air Conditioning (7)Alignment (13)Auto Safety (1)Automotive News (6)Battery (7)Brakes (8)Cabin Air Filter (6)Check Engine Light (2)Cooling System (9)Dashboard (1)Diagnostics (4)Diesel Maintenance (1)Differential Service (2)Drive Train (5)Emergency Items (1)Engine Air Filter (3)Exhaust (6)Fluids (10)Fuel Economy (2)Fuel Saving Tip: Slow Down (1)Fuel System (38)Headlamps (3)Inspection (5)Keys to a long lasting vehicle (3)Maintenance (43)Monitoring System (3)Older Vehicles (2)Parts (10)Safety (5)Serpentine Belt (4)Service Intervals (6)Service Standards (11)Shocks & Struts (6)Shocks and Struts (1)Steering (6)Suspension (2)Timing Belt (5)Tire Pressure Monitoring System (1)Tires and Wheels (38)Transmission (6)Warranty (1)Windshield Wipers (5)
 

Associations