AUTONET TV

Don't Blow a Gasket! (Valve Cover Gasket Replacement)

When you head out to your vehicle after it's been parked and notice oil leaking underneath it, that's something to have looked at right away.  Oil leaks mean your oil level is probably low and running a vehicle in that condition can lead to expensive repairs.

While there are many reasons oil leaks develop, one possibility is a bad valve cover gasket.  Vehicle engines have a cover bolted over the spot where the engine valves are, and that cover keeps the oil inside the engine. In between the cover and the engine is a gasket that keeps that seal tight.  But after many years of high engine temperatures and vibrations, that gasket or the bolts that hold on the valve cover can fail or loosen, and oil can leak.

You may see dirty oil on the valve cover in the engine compartment, near the spark plugs, or around the bolts that hold the valve cover on.  All those are signs of leakage and time to bring your vehicle in for our technicians to check out.

In some vehicles, taking off the valve cover and replacing the gasket is a relatively easy job. In some models, though, other engine parts are located near that part of the engine and must be removed to get at the gasket, so repair costs can vary widely.

The technician will measure to make sure the valve cover isn't warped so it can be reused. If it is warped, they'll recommend replacing it with the gasket.  

While the technician has that area of your engine accessible, they will also check to see if other components need replacing at the same time, which could save you money.  And because valve cover gaskets usually fail in older vehicles, the technician will check for other oil leaks then, too. 

One of the best ways to be sure your valve cover is doing its job is to have your vehicle regularly maintained.  The technician will periodically look over your engine compartment and make sure you know when things are showing signs of age and wear BEFORE they fail and leave you stranded.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Shifty Letters PRNDL (Transmission)

You probably figured out those shifty letters.  They're what you see on your automatic transmission shifter and stand for Park, Reverse, Neutral, Drive and Low.  Your automatic transmission is one of the great automotive inventions; here are some ways you can keep yours working well.

Maintain your transmission regularly.  A technician will check your transmission fluid's level and even its appearance and smell.  If it's dark or has an unusual odor, that could be a sign of trouble.

Change from one transmission direction gear into another only when your vehicle is stopped.  So many drivers want to switch from Reverse to Drive quickly or the other way around.  If you do that when the vehicle is moving, you can damage your automatic transmission.

Keep your vehicle's cooling system in top shape.  What does the cooling system have to do with the transmission? It helps keep the transmission fluid from overheating. 

Follow the manufacturer's recommendations for maintaining your transmission.  Some recommend at least an annual checkup by a trained technician. 

Let your powertrain warm up a little before overtaxing it. Especially in cold weather, don't step on the throttle too aggressively before all components are warmed up.  That way both your engine and transmission will last longer.

Transmissions can be costly to fix.  If you treat your powertrain with respect and regularly maintain it, you'll not only avoid expensive repairs, but you’re also much less likely to find yourself stranded because of a transmission problem. 

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

Not-So-Smooth Operator (Transmission Signs of Trouble)

You are heading down a flat, newly paved street when all of a sudden you feel it.  Your vehicle jumps a little bit when you're accelerating and changing gears.  You know it's not the surface of the road because it's smooth as silk.  So what did you just feel?

That kind of jumping—or grinding or slipping—during gear changes could be a sign of trouble in your automatic transmission.  And it's important to get it checked out fairly soon because some transmission problems that aren't fixed early can lead to more involved and expensive repairs.

By far most vehicles on the road in North America have automatic transmissions, and they are workhorses.  Unlike early cars with balky, hard-to-shift manual transmissions, the latest automatics allow you to drive without having to even think about gear changes.  But you should know about a few signs of trouble to look for if they ever start showing up.

• When you first get going and shift your vehicle from Park into Drive, do you feel a slight pause?
• How about when you shift into Reverse?  Is there a little lag?
• Does your vehicle sometimes shake when you're traveling down the road?
• Do you smell something burning in your engine compartment?
• Do you hear a clunk when your vehicle shifts?
• Do you have spots of a reddish or brown, oily fluid in the driveway under your vehicle?

If you do, these are worth getting checked out at our service center.  When automatic transmissions start to show signs of wear and age, it can be because of a number of reasons.  They can be caused by your transmission fluid getting old and contaminated, or its level may be low.  The gears can be worn.  You may have a leak somewhere in your transmission.  Or transmission problems might be caused by a computer problem.

Transmission issues aren't always expensive to repair.  Sometimes there may be a leak in a hose or gasket.  Or a computer needs to be reset.  Other issues may be much more involved.  This is why it's important to get your vehicle checked out when you do notice something doesn't feel, look, shift or smell quite right.  Everyone wants their automatic transmission to be a smooth operator.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994

The Little Valve that Could (PCV Valve Replacement)

It's easy to get letters like PVC and PCV mixed up.  PVC is a plastic that's used in a lot of things, especially plumbing pipes.  And PCV is a valve that helps your engine burn off excess fumes rather than having them pollute our atmosphere. 

PCV stands for positive crankcase ventilation.  When your engine ignites gasoline in the cylinders, some of the gases produced make their way into the crankcase, where oil is held to lubricate the engine.  In earlier days, those gases would be vented out through a hose and go directly into the air.  It was a waste of gasoline (since about three-fourths of the gases were unburned fuel) and a nasty source of pollution.

So engineers devised a one-way valve that directed those gases back into the engine's air intake system to be burned again.  After a while, the PCV valve can get clogged up with gummy oil.  Not only does that reduce the recirculation of the gases, but it can also cause pressure in the crankcase to increase and possibly lead to an oil leak.

Signs your PCV valve has failed are oil leaks around the engine compartment or under your vehicle and poor engine performance. Your fuel economy will get worse. If you notice those signs, we can check your PCV valve. 

At the same time a technician inspects the PCV valve, they'll also check the vacuum hose that runs back to the air intake.  Plus, they'll make sure the vehicle doesn't have any other engine problems that might be contributing to your issues. 

Many technicians recommend replacing your PCV valve with each major tune-up, so you get ahead of any problems before they develop.  Now that you're an expert on PCV, it may be time to check out those PVC pipes in your bathroom!

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994