Skip To Content

Best Auto Repair, Anchorage

400 W 53rd Ave Anchorage, AK 99518

907-563-4994
Opening Hours
  • Mon 7:30AM - 6:00PM
  • Tue 7:30AM - 6:00PM
  • Wed 7:30AM - 6:00PM
  • Thu 7:30AM - 6:00PM
  • Fri 7:30AM - 6:00PM
  • Sat Closed
  • Sun Closed
CONTACT US

How Your Check Engine Light Works

Posted May 19, 2010 10:00 AM



Have you ever had an experience like this in Anchorage, AK? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your Check Engine light starts flashing!

You fear the worst, but within a block or two, the light stops flashing, but stays on. By the next day, the light is off.

You wonder; "What was going on?" Well, it's actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn't be that much air when the engine is just idling. Something's wrong. Whatever's wrong could cause some serious engine damage.

Warning, warning! It flashes the Check Engine light to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I'm still concerned, I'll keep this light on for now.

Then the Check Engine light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it's gone now. The danger is past, I'll turn that light off.

Now a flashing Check Engine light is serious. You need to get it into L and M Motors Inc as soon as possible. But if it stops flashing you can wait a few days, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air-to- fuel mix, spark advance and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the Check Engine warning.

The computer will then try to make adjustments if it can. If the computer can't compensate for the problem, the Check Engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what's wrong.

Actually, the code will tell the technician what sensor reading is out of parameters. It can't really tell him why, because there could be any number of causes.

Let's say you're feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees F (40 degrees C).

You know your symptom – a fever – but you don't know what's causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory and some in permanent memory. Each manufacturer's computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy online or that the auto parts store uses, doesn't have the ability to retrieve long-term storage or manufacturer specific codes. Your Anchorage, AK, service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you've got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor — which is not cheap — and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at L and M Motors Inc. Give us a call and let us help you resolve your check engine light issue.

L and M Motors Inc
400 W 53rd Ave
Anchorage, AK 99518
907-563-4994



Search



Archive

December 2009 (4)
January 2010 (3)
February 2010 (4)
March 2010 (5)
April 2010 (4)
May 2010 (3)
June 2010 (3)
July 2010 (3)
August 2010 (5)
September 2010 (3)
October 2010 (3)
November 2010 (4)
December 2010 (4)
January 2011 (4)
February 2011 (4)
March 2011 (52)
April 2011 (4)
May 2011 (5)
June 2011 (2)
August 2011 (3)
September 2011 (2)
October 2011 (2)
December 2011 (4)
February 2012 (1)
March 2012 (5)
April 2012 (4)
May 2012 (1)
June 2012 (3)
July 2012 (1)
August 2012 (1)
November 2012 (1)
December 2012 (2)
March 2013 (1)
April 2013 (3)
May 2013 (2)
October 2013 (5)
November 2013 (2)
January 2014 (2)
February 2014 (4)
March 2014 (2)
July 2014 (3)
August 2014 (8)
September 2014 (4)
October 2014 (5)
November 2014 (4)
December 2014 (4)
January 2015 (5)
February 2015 (4)
March 2015 (5)
April 2015 (4)
May 2015 (2)
June 2015 (6)
September 2015 (2)
October 2015 (4)
November 2015 (4)
December 2015 (3)
February 2016 (2)
March 2016 (4)
April 2016 (4)
May 2016 (5)
June 2016 (4)
July 2016 (4)
August 2016 (5)
September 2016 (4)
October 2016 (4)
November 2016 (5)
December 2016 (4)
January 2017 (5)
February 2017 (4)
March 2017 (4)
April 2017 (4)
May 2017 (5)
June 2017 (4)
July 2017 (4)
August 2017 (4)
September 2017 (3)
October 2017 (5)
November 2017 (4)
December 2017 (2)
January 2018 (5)
February 2018 (4)
March 2018 (4)
April 2018 (5)
May 2018 (4)
June 2018 (4)
July 2018 (5)
August 2018 (4)
September 2018 (5)
October 2018 (4)
November 2018 (4)
December 2018 (5)
January 2019 (5)
February 2019 (3)
March 2019 (4)
May 2019 (2)
June 2019 (5)
July 2019 (2)
August 2019 (2)
September 2019 (3)
October 2019 (5)
November 2019 (4)
December 2019 (5)
January 2020 (5)
February 2020 (4)
March 2020 (5)
April 2020 (1)
May 2020 (2)
June 2020 (1)
July 2020 (1)
August 2020 (5)
September 2020 (4)
October 2020 (4)
November 2020 (5)
December 2020 (4)
January 2021 (6)
February 2021 (4)
March 2021 (4)
April 2021 (4)
May 2021 (5)
June 2021 (4)
July 2021 (4)
August 2021 (5)
September 2021 (4)
October 2021 (3)

Categories

Air Conditioning (12)Alignment (17)Alternator (5)Auto Safety (6)Automotive News (8)Battery (15)Brakes (14)Cabin Air Filter (8)Check Engine Light (4)Cooling System (18)Customer Detective Work (1)Dashboard (3)Diagnostics (5)Diesel Maintenance (1)Differential Service (3)Drive Train (9)Emergency Items (1)Engine Air Filter (3)Exhaust (10)Fluids (17)Fuel Economy (8)Fuel Saving Tip: Slow Down (2)Fuel System (46)Headlamps (5)Inspection (7)Keys to a long lasting vehicle (4)Maintenance (60)Monitoring System (3)Oil Change (3)Older Vehicles (5)Parts (9)Safe Driving (1)Safety (6)Serpentine Belt (6)Service Intervals (9)Service Standards (12)Shocks & Struts (8)Shocks and Struts (1)Spark Plugs (1)Steering (12)Suspension (3)Timing Belt (6)Tire Pressure Monitoring System (1)Tire Rotation and Balancing (1)Tires (6)Tires and Wheels (40)Transmission (8)Warranty (2)Water Pump (1)What Customers Should Know (56)Wheel Bearings (1)Windshield Wipers (9)Winter Prep (3)
  • ASE (Automotive Service Excellence)
  • CARQUEST
  • IATN (International Automotive Technicians' Network)
  • TECH-NET
  • Car Care Aware

Testimonials

Christine is so helpful and the sweetest lady! These guys are amazing! They are honest about what is being done to your car and don't overcharge you like dealerships! I just moved up to Alaska and plan on using these guys forever. Definitely recommend their service and expertise.
view all reviews
TAP TO CALL NOW 907-563-4994 X